Electronics Forum | Thu May 27 11:21:03 EDT 2010 | jdumont
Hello Fonsi, we have been using a 421 for a couple of years now (one of the first customers in North America). The hardware is fantastic. No issues, camera and lighting system are great. Initially we did have some small software bugs but Samsung w
Electronics Forum | Fri Aug 02 19:45:58 EDT 2019 | bobpan
haha....thanks Steve!!! Nozzle Height of 1 means that you have dust or something in the quadalign lens. You need to clean the lens with alcohol then a dry lint free cloth and if it stays the same....that means the lens has an issue or there is dirt
Electronics Forum | Fri May 01 20:12:29 EDT 1998 | Steve Gregory
| I've never seen this before. Today, I got this tombstoning on Tantalum Capacitors (Okay, I saw that before) | Here's the part that seems weird to me: | -They didn't tombstone onto a termination - they went onto their sides! That's right, both ter
Electronics Forum | Wed Nov 27 09:51:08 EST 2002 | Claude_Couture
I have worked with 4c's for two years. The feeders are "tinker toys" with a mechanism that slips, so the pick-up has to be adjusted several times as the reel is used, especially with 13" reels. The worm gear was plastic on the steel shaft of the moto
Electronics Forum | Mon Jul 26 21:56:53 EDT 2004 | pdeuel
The camera is not driven from the motor cards. The camera is attached to what is called a forcer. For the Y axis there are two of them. One is wired backwards from the other. one of the forcers is connected to a flex chanell for the air and electrica
Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech
Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa
Electronics Forum | Tue Jan 11 12:13:16 EST 2011 | methos1979
Fortunately for me, we do not use Repair Plus so I can't comment on how well that works with the newest software. I have been thinking of doing the html saving though so my engineering and management team, especially those located off-site, can revi
Electronics Forum | Mon Oct 14 17:10:48 EDT 2002 | burb1999
I have programmed/operated all but the siemens... fuji-1 it is the fastest machine, and for high volume. Use also Unicam makes it easier to program. Now Im just talking the CP, the IP im not to fond of use something like the universal... MYDATA-2
Electronics Forum | Tue Jul 27 19:02:46 EDT 2004 | pdeuel
Not an easy task and requires calibration jig. MPM support field service is your best bet. The adjustment screws for the prizm located on left side of camera will adjust the x direction. There is a set screw on the front that must be loosened first.
Electronics Forum | Wed Nov 09 11:01:41 EST 2005 | DannyJ
Hi Red and Greg, First, to Avalancher, the service that is mentioned is fantastic. I have used it various times with various connectors and headers with fantastic results. Just contact MyData and they'll tell you what they need. It's usually 5-1
